Voltage measurement to 2000 V
With the voltage measuring ranges, test objects can be checked for the absence of voltage in networks of up to 2KV. This is important for insulation resistance measurement, because extraneous voltages distort measurement results. 

Discharge of Capacitive Devices under Test
Capacitive devices under test such as cables and coils, which might be discharged to test voltage, are discharged by the measuring instrument. The drop in voltage can be observed at the needle gauge. 

Measurement in accordance with EN61557 part 1 and 2/ IS 2992 (VDE 0413)
Measuring current is equal to 1mA at a test voltage of 100V, 250V, 500V and 1000V. 

Measurement Cables with Heavy-Duty Insulation
The measurement cables with heavy-duty insulation are permanently connected for safety and technical reasons. Possible danger caused by the unintentional removal of cables is thus avoided, for example when charging occurs due to capacitive test objects. 

Needle Gauge with LEDs
Three LEDs arranged within the needle gauge make reading easier. The lamp lights up which is located next to the scale, which is assigned to the selected measuring range. During the measurement sequence, the green LED indicates whether or not the battery charge is sufficient for the measurement.

• Broad measuring range from 10KOhm to 1TOhm
• Easy to read logarithmic display
• Test voltages : 100V, 250V, 500V, 1000V, 1500V, 2000V, 2500V, 5000V
• Measurement to 2000V in accordance with DIN VDE 0413
• Measuring range : 100kOhm to 100MOhm (1000V)
• Voltage measurement to 2000V 
• Guard Terminal eliminates surface current
• Power supply with batteries or Crank Generator (Optional) or mains operated (Optional)

Operating Temperature	0 deg C to +40 deg C
Relative Humidity	Max. 75%
Frequency	50Hz +- 10Hz
Ambient Temperature	+ 23 C +- 2K
Battery Voltage	8V +- 1%
Operating Position	Horizontal
Power Supply Voltage	9V
Nominal Power	230V AC, +- 15%, 50Hz
Storage Temperature	-20 deg C to +60 deg C (without batteries)
Elevation	Up to 2000m