LDO Pump Features: • Normal flow at 1440 r.p.m. or 2880 r.p.m. with oil viscosity 32 Cst. At 37.5C at normal working temperature and 10 kg/cm pressure. • Min.viscosity 5 cst. • Max. viscosity 450 cst. • Max liquid temperature 200c • Capacity/range. 50/6000 LPH.max pressure 30kg/cm. • The pressure and flow indications are to be considered as basic value. They change with different pipe diameter,length or oil viscosity • Direction of rotation clockwise=R,anti-clockwise=L looking from shaft end.
Advantages • Pump barrel made of hydraulic cast-iron. • Gear made of hing quality steel. • Self inducing. • With internal bypass. • Pressure regulator,progressively adjustable. • Simple attachment with a flange. • Tight shaft-seal. • Turning directionto the right or left 1440 or 2880 r.p.m. • Different mounting position with shaft horizontally or vertically with seal at the bottom. • Vacuum, pressure and control connections easy to reach. Uses(Applications) • Oil burner, hydraulic drive and pressure-pump. • Pressure and transfer pump. • Booster pump for diesel locomotion. • Pump for force feed lubrication. • Eventually with separate pressure regulating valves. • For gas oil,medium,heavy and vary heavy oil. • Filter pumping. • Pump for PHF units. • Pump for motor-pump group with flange and coupling parts. • PumpFor lubrication oil and hydraulic oil. • Pump suitable for LDO,FO,HSD &LSHS Note: As improvement are made from time to time the specification in this bulletin are subject to alteration without notice.
LDO Pump Features: • Normal flow at 1440 r.p.m. or 2880 r.p.m. with oil viscosity 32 Cst. At 37.5C at normal working temperature and 10 kg/cm pressure. • Min.viscosity 5 cst. • Max. viscosity 450 cst. • Max liquid temperature 200c • Capacity/range. 50/6000 LPH.max pressure 30kg/cm. • The pressure and flow indications are to be considered as basic value. They change with different pipe diameter,length or oil viscosity • Direction of rotation clockwise=R,anti-clockwise=L looking from shaft end.
Advantages • Pump barrel made of hydraulic cast-iron. • Gear made of hing quality steel. • Self inducing. • With internal bypass. • Pressure regulator,progressively adjustable. • Simple attachment with a flange. • Tight shaft-seal. • Turning directionto the right or left 1440 or 2880 r.p.m. • Different mounting position with shaft horizontally or vertically with seal at the bottom. • Vacuum, pressure and control connections easy to reach. Uses(Applications) • Oil burner, hydraulic drive and pressure-pump. • Pressure and transfer pump. • Booster pump for diesel locomotion. • Pump for force feed lubrication. • Eventually with separate pressure regulating valves. • For gas oil,medium,heavy and vary heavy oil. • Filter pumping. • Pump for PHF units. • Pump for motor-pump group with flange and coupling parts. • PumpFor lubrication oil and hydraulic oil. • Pump suitable for LDO,FO,HSD &LSHS Note: As improvement are made from time to time the specification in this bulletin are subject to alteration without notice.