Categories

S R M Machines Center

20 Ton C Type Power Press

₹ 125000.00  Incl. GST ₹ 105932.2 Excl. GST

Description

Details: Frame : The Frame is of all Steel Construction, Fabricated from Steel Plates with Suitable Cross ribbings. Presses upto 30T will be supplied with C.I. Legs. Proper alignment of the frame is ensured by machining of the cut steel plates before welding. Clutch : The clutch is of pin/rolling key type. The clutch is rigid and well supported. The clutch gives continues stroke for mass production. Crank Shaft : Crank Shaft is made of special alloy steel machined to close accuracy and fitted in bronze bushes for perfect alignment. Flywheel : Properly sized flywheel, is made of high grade cast iron & is balanced for storing and releasing adequate energy for the pressing operations. Gears : Gears are of steel cast. Gear teeth are generated by hobbing. Table & Ram : Table and ram are made of heavy duty cast iron & seasoned. They are perfectly aligned to each other quality pressings. Lubrication : An efficient shot lubrication system has been provided for lubrication the sliding surface and moving parts. The lubrication is achieved through hand pump.
Product Details
Capacity 20 Ton
Material Mild Steel
Bed Size 305 x 508 mm (Length x Width)
Motor Power 2 HP
Crankshaft Diameter 70 mm
Hole in Bed 89 mm
Bed Thickness 63 mm
Stroke Per Minute 50
Weight 1100 Kgs (Approx)



Minimum Order Quantity: 1
1 Pack contains : 1 Unit
SELLER: S R M Machines Center

20 Ton C Type Power Press

Product code (MPN): ITB-A8E78C4A
Availability:In Stock
₹ 125000.00  Incl. GST ₹ 105932.2 Excl. GST
  • Description
    Details: Frame : The Frame is of all Steel Construction, Fabricated from Steel Plates with Suitable Cross ribbings. Presses upto 30T will be supplied with C.I. Legs. Proper alignment of the frame is ensured by machining of the cut steel plates before welding. Clutch : The clutch is of pin/rolling key type. The clutch is rigid and well supported. The clutch gives continues stroke for mass production. Crank Shaft : Crank Shaft is made of special alloy steel machined to close accuracy and fitted in bronze bushes for perfect alignment. Flywheel : Properly sized flywheel, is made of high grade cast iron & is balanced for storing and releasing adequate energy for the pressing operations. Gears : Gears are of steel cast. Gear teeth are generated by hobbing. Table & Ram : Table and ram are made of heavy duty cast iron & seasoned. They are perfectly aligned to each other quality pressings. Lubrication : An efficient shot lubrication system has been provided for lubrication the sliding surface and moving parts. The lubrication is achieved through hand pump.
    Product Details
    Capacity 20 Ton
    Material Mild Steel
    Bed Size 305 x 508 mm (Length x Width)
    Motor Power 2 HP
    Crankshaft Diameter 70 mm
    Hole in Bed 89 mm
    Bed Thickness 63 mm
    Stroke Per Minute 50
    Weight 1100 Kgs (Approx)



    Minimum Order Quantity: 1
    1 Pack contains : 1 Unit
  • FAQs
    Need some help? Ask us!