The series of machines is specially designed with an integrated injection circuit. The special manifold minimizes hysteresis of hydraulic response, increases injection response and is easy to maintain. With this outstanding design, you get higher qualification percentages of die casting parts and stability.
Machine Weight
16 Tons
Shot Unit
3 Phases
Injection Sys.
3 Stages
Clamping Force
420 Tons
Die Platen
1000x1000 mm
Tie-Bar Spacing
650x650 mm
Die Stroke
470 mm
Die Height
300~700 mm
Injection Force
35 Tons
Intensifier Rate
2.3
Injection Stroke
500 mm
Size
6500x2200x2500 mm
Hydraulic Oil
800 L
Die Water Valve (fix)
3/8"x7
Hydraulic Cooler Flow
40 LPM
Control Unit
PLC+MMI
Electricity
22.5 KW
Max Casting Area
1036 cm2
Max Weight Of Shot
1.10 Kg
Max Shot Speed
7 m/sec
Casting Capacity Efficiency
20%
The injection circuit employs two sets of independent accumulators, providing the first and second stage injection and intensifying injection functions. With the independent intensifying accumulators, more stable intensified pressure can be achieved.
The injection unit allows for various parameter adjustments, such as pressure buildup time at the first and second stage, intensified pressure value and injection pressure value. Each part is equipped with a sensor for feeding back the injection speed and pressure to the controller. The controller will compare the difference between the actual injection value and the setting value, then the operator makes fine tuning according to the comparison result. In addition, the operator may understand the current injection condition through the displayed curve. This greatly upgrades injection accuracy.
Minimum Order Quantity: 1 1 Pack contains : 1 Unit
The series of machines is specially designed with an integrated injection circuit. The special manifold minimizes hysteresis of hydraulic response, increases injection response and is easy to maintain. With this outstanding design, you get higher qualification percentages of die casting parts and stability.
Machine Weight
16 Tons
Shot Unit
3 Phases
Injection Sys.
3 Stages
Clamping Force
420 Tons
Die Platen
1000x1000 mm
Tie-Bar Spacing
650x650 mm
Die Stroke
470 mm
Die Height
300~700 mm
Injection Force
35 Tons
Intensifier Rate
2.3
Injection Stroke
500 mm
Size
6500x2200x2500 mm
Hydraulic Oil
800 L
Die Water Valve (fix)
3/8"x7
Hydraulic Cooler Flow
40 LPM
Control Unit
PLC+MMI
Electricity
22.5 KW
Max Casting Area
1036 cm2
Max Weight Of Shot
1.10 Kg
Max Shot Speed
7 m/sec
Casting Capacity Efficiency
20%
The injection circuit employs two sets of independent accumulators, providing the first and second stage injection and intensifying injection functions. With the independent intensifying accumulators, more stable intensified pressure can be achieved.
The injection unit allows for various parameter adjustments, such as pressure buildup time at the first and second stage, intensified pressure value and injection pressure value. Each part is equipped with a sensor for feeding back the injection speed and pressure to the controller. The controller will compare the difference between the actual injection value and the setting value, then the operator makes fine tuning according to the comparison result. In addition, the operator may understand the current injection condition through the displayed curve. This greatly upgrades injection accuracy.
Minimum Order Quantity: 1 1 Pack contains : 1 Unit
