The hairline machine
The hairline machine is the usual machine for the production line, and the roller of the machine is including the flower roll, bottom roll and the transmit rolls.
Basing on the sanding pattern, the follower roll with the NRD rubber covers the surface, with the gap on surface, the seam distance and the seam depth is very important of the gap.
In the central part of the main machine, the electric eye of the hairline machine could have control the swing range; make the belt to cover the sheet, so that the sheet will not seal the sheet without the processing. The main bearing for the machine will swing from front to back.
The transmit rolls for the hairline machine control the stable transmission position for the stainless steel plate, make the range entry to the suitable central position to be processed by the belt and the flower roller.
The basic plate selection should be hairline polishing surface stainless steel sheet, it should be subjected to polish with 150# 240#abrasive belt.
The application verticals of this finish in elevator, architecture decoration, revolving door, furniture, home appliance, auto sector, exterior decoration, etc.
The Hairline polishing machine specification and the parameter:
Sanding pattern | HL |
System | Wet roller grinding |
The grinding head quantities | 2-3 grinding heads |
Machine weight | 13T |
working width | 900,1250,1500 MM, customized available |
Sheet size | 1250*2500 mm/ 1550*3000 MM customized available |
Sheet thickness | 0.3-4.0 mm |
Roller dimension | 250 mm |
Abrasive belt width | Depending on the sheet width |
Abrasive belt length | 2620 mm |
Speed of the line | 6-25 m/ min |
The hairline machine
The hairline machine is the usual machine for the production line, and the roller of the machine is including the flower roll, bottom roll and the transmit rolls.
Basing on the sanding pattern, the follower roll with the NRD rubber covers the surface, with the gap on surface, the seam distance and the seam depth is very important of the gap.
In the central part of the main machine, the electric eye of the hairline machine could have control the swing range; make the belt to cover the sheet, so that the sheet will not seal the sheet without the processing. The main bearing for the machine will swing from front to back.
The transmit rolls for the hairline machine control the stable transmission position for the stainless steel plate, make the range entry to the suitable central position to be processed by the belt and the flower roller.
The basic plate selection should be hairline polishing surface stainless steel sheet, it should be subjected to polish with 150# 240#abrasive belt.
The application verticals of this finish in elevator, architecture decoration, revolving door, furniture, home appliance, auto sector, exterior decoration, etc.
The Hairline polishing machine specification and the parameter:
Sanding pattern | HL |
System | Wet roller grinding |
The grinding head quantities | 2-3 grinding heads |
Machine weight | 13T |
working width | 900,1250,1500 MM, customized available |
Sheet size | 1250*2500 mm/ 1550*3000 MM customized available |
Sheet thickness | 0.3-4.0 mm |
Roller dimension | 250 mm |
Abrasive belt width | Depending on the sheet width |
Abrasive belt length | 2620 mm |
Speed of the line | 6-25 m/ min |