Slim Drill SLD-100 (LD-4) Pneumatically operated Drill Capable of Drilling down the Hole Hammer mode – ideally suitable for Drilling Lead holes for Diamond Wire Cutting of Decorative Marble, Granite Rocks etc. The drill has been specially designed for precision drilling of matching holes and ability to drill holes in both Vertical & Horizontal positions. A Ball joint is provided at the bottom of the Mast to facilitate Precision alignment for matching holes. Provided with one spike & two Anchoring Rods & Adjusting screws to maintain perfect rigidity while drilling. Light in weight, machine can be easily dismantled into four Sub-assemblies – each weighing not more then 50kgs – thus ensuring easy portability and repositioning.
Being a well known organization, we are engaged in offering an extensive range Slim Drill JRD to meet the needs of our customers. The Slim Drill JRD we offer is well equipped and ensures long lasting service life. In addition to this, our range can be easily used for drilling and is used in construction sites in bulk.Features: - Well designed
- Dependable
- Easy to use
| HOLE RANGE: |
| Down the hole Air Hammer (DTH) | Dia76mm ~ Dia115mm |
| Max. Drilling Depth (Vertical) | 30mtrs. |
| Max Drilling Depth (Horizontal) | 20mtrs. |
| Minimum centre height of hole from ground | 125mm |
| Drill Pipe (for Drill Bit DIA 90mm to 115mm) | 76mm O.D |
| Drill Pipe (For Drill Bit DIA76mm) | 60.3mm O.D |
| Drill Pipe Length | 1.22mtrs. (4ft) |
| | |
| Rotation Unit for DTH: |
| BHP | 4.5H.P |
| Speed | 0~50 RPM |
| Torque | 1125Nm (10,000 lb.in) |
| | |
| Feed Unit: |
| BHP | 4.5H.P |
| Pull up Force | 0~2200 kgf |
| Pull Down Force | 0~2200 kgf |
| Max Pull up Speed | 0~15m/min |
| Feed Type | Chain |
| | |
| Recommended Air Compressor Capacity: |
| For Down the hole Air Hammer (DTH) | |
| Free Air Delivery | 12.7m3/min (450CFM) |
| Working Pressure | 10.5kg/cm2 (150PSI) |
| | |
| Dimensions & Weight | |
| Over All Height | 3000mm |
| Width | 600mm |
| Depth | 600mm |
