High strength epoxy bedding and repair mortar
MasterBrace 2200 is a solvent free, high performance, non-slumping epoxy mortar and adhesive. MasterBrace 2200 can be used as a bedding mortar, thixotropic adhesive and non-sag
concrete repair mortar.
RECOMMENDED USES
1. Bedding of bridge beams or steel bridge bearings
2. Repairing surface defects in concrete in horizontal, vertical and overhead applications
3. Fixing of injection ports for MasterInject resins Bonding of dowels, bolts and anchors into concrete
4. Rapid structural repair of concrete
5. Repair of concrete posts in situ
FEATURES AND BENEFITS
1. Adheres to concrete surfaces – Allows rapid repair of concrete
2. Solvent free – Low VOC and non-shrink
3. Pre-proportioned packaging – No job site errors
4. Easy application – No primer necessary
5. High abrasion, impact and chemical resistance – Can be used as contact surface in aggressive environments
6. Cures hard at low temperatures – Wide application range
Usage/Application | Structural Repairs |
Packaging Type | Bucket |
Form | Gel |
Components | Two Component System |
Pack Type | PP Buckets |
Density | 1.85kg/L |
Chemical Composition | Epoxy |
Coverage | A 6 kg kit of MasterBrace 2200 will yield 3.24 litres. |
Type | Normal-Drying Epoxy Adhesives |
Packaging Size | 6 Kg |
Tensile Strength | 10 MPa |
Temperature | 15-35 deg C |
Mix Ratio | 10075 pbw |
Recoat Time | 8 hours |