Tensojute MK.2 is a PC based Jute tester capable of providing Jute Strength and elongation at break across individual sample of sample set including Avg, SD, CV% etc. as desired by your SQA. The system consists of a TEST RIG and is controlled from the computer keyboard. The tests are completely automated and all data acquisition is done electronically using imported sensors. Average time for 50 samples- 20 minutes.
Sample length 500 mm./ 610 m.m.
Rate of jaw travel 30 cm. /minute
Maximum pull choice 60.0 Kgf. / 130 Lbs.
Resolution of display 0.1 Kgf. / 0.1 Lbs.
Display of force and Displayed on monitor
Elongation at break
The operator attaches the sample to the Jaws.
The test rig is controlled from the PC, via the dedicated Software and the operator can start
stressing the sample.
During the stressing of the sample a real time graph of Force v/s Elongation is displayed
on the screen.
On detection of the break the jaws move back to the test length and the next sample can be
tested.
Operator can choose between individual sample tests or testing of a set of samples, (In case of a sample set the reporting will display Mix, Max and Avg values for Force and Elongation)
Reporting Capabilities :
1. A graphical representation of individual breaking force, of the samples.
2. A report containing the following:
1. Yarn Identification: Date of production, Shift and customer if known
2. Test condition: RH% , Temperature, Moisture content
3. Yarn Grist: The Count lb./ Count Tex
and Count CV.% , (Calculated from the weights. of hanks
keyed in by the operator)
4. Yarn Strength Data: Maximum / Average / Minimum / Weak Strength values of
Beaking load in Lb./ Quality Ratio,/ Tenacity . in gm./ tex.
and Cn. / tex.
5. R.K.M. / Quality Ratio, and Strength C.V. % calculated from the breaking load values
read from the machine.
6. The elongation at break is also displayed.
Minimum Order Quantity: 1
1 Pack contains : 1 Unit
.png)
