Categories

MTA Technologies

Power Press

₹ 1000000.00  Incl. GST ₹ 847457.63 Excl. GST

Description

We are a leading Wholesaler of SNX 250 Singhal Power Press from Ludhiana, India.
Description:
  • Plunger Guide System Designed For High Precision And Less Die Wear.
  • Thrust Load From Eccentric Motion Is Absorbed By The Plunger Guide System.
  • The Plunger Guide Is The Primary Guiding Force, Preventing Side Load On The Gibs.
  • Together, The Plunger Guide And Gib Surface Area Of The Snk Series Ensures Less Tool Wear And Higher Part Accuracy.

Minimized Frame Gap Opening: 
  • The Highly Rigid Frame Construction Minimized The Frame Gap Opening Caused By Elongation And Deformation Of The Frame When The Press Is Loaded.
  • In Addition, The Thick Bolster Reduces Its Deflection.
  • These Features Satisfy Requirements For Higher Accuracy Press Works.
  • Eccentric Shaft: 
  • Snk Series Are Equipped With Eccentric Shaft As Main Drive Shaft.
  • Eccentric Shafts Assure Minimal Shaft Deflection Compared To Traditional Crankshaft Designs.

Wet Clutch: 
  • Pneumatic High Torque Wet Clutch And Brake Unit With Sintered Multi-disc Linings Provides Low Noise, Long Life Operation With Minimal Maintenance
  • Heavy Duty Slide Construction A Heavy Duty Slide Is Used For Increased Rigidity.
  • A Motorized Slide Adjustment With Digital Display Is Standard.
  • The Die Height Is Displayed In Metric Units Of 0.1 Mm For Precise Slide Adjustment.
  • The Slide Is Guided Primarily By The Plunger Guide Mechanism Along With Full- Length. Six Point Gibs.
  • The Precision Of The Plunger Guide And Gibbing Is A True Advantage With Tooling, Allowing Tight Tolerances Between The Punch And Die.

Hydraulic Overload Safety:
  • A Built-in Hydraulic Overload Protection (Olp) System Completely Ensures Press And Tool Safety During Any Overload Situation.
  • As Soon As The Load Exceeds The Set Value, The Olp Device Will Release The Hydraulic Pressure And At The Same Time Stop.

Standard Accessories:
  • Wet Clutch
  • Isi Marked Electric Motor With Electrical Control Panel
  • Mitsubishi (Made In Japan) Fx3u Plc
  • 7.2" Tft Touch Screen Fault Finding Hmi With Crank Angle
  • Indicator And Tool Data Storage
  • Motorized Grease Pump
  • Hydraulic Overload Safety
  • Encoder Based Programable Ecams
  • Dual Solenoid Valve
  • Die Height Indicator
  • Motorized Slide Adjustment
  • Anti Repeat Safety Device
  • Pneumatic Balancers
  • 2 Nos Mis-feed Socket

Optional Accessories:
  • Pneumatic Die Cushion
  • Photo Electric Safety Device
  • Variable Speed With Vfd Motor
  • Quick Die Change System
  • Load Tonnage Monitor
  • Decoilers, Straightners & Feeders
 Product Details: 
Capacity250 Ton
Usage/ApplicationPunching
MaterialMild Steel
  
Load14 Ton
Power SourceHydraulic
Automation GradeAutomatic
Bolster Thickness180 mm
Length Of Stroke120 mm
Main Motor Power25x4
Tool Bore80 mm
  
Fix Stroke250 mm
SPM30
Rating Point6 mm
Die Height500 mm
Slide Adjustment140 mm
Slide Area960x720 mm
Bolster Area1500x900 mm
Floor To Top Of Bolster1000 mm
Clear Dist.Betn.Uprgights940 mm
Slide Adj. Motor1.5 kW
Pressure Pad Area740x540 mm


Minimum Order Quantity: 1
1 Pack contains : 1 Unit
SELLER: MTA Technologies

Power Press

Product code (MPN): ITB-05B8E4C5
Availability:In Stock
₹ 1000000.00  Incl. GST ₹ 847457.63 Excl. GST
  • Description
    We are a leading Wholesaler of SNX 250 Singhal Power Press from Ludhiana, India.
    Description:
    • Plunger Guide System Designed For High Precision And Less Die Wear.
    • Thrust Load From Eccentric Motion Is Absorbed By The Plunger Guide System.
    • The Plunger Guide Is The Primary Guiding Force, Preventing Side Load On The Gibs.
    • Together, The Plunger Guide And Gib Surface Area Of The Snk Series Ensures Less Tool Wear And Higher Part Accuracy.

    Minimized Frame Gap Opening: 
    • The Highly Rigid Frame Construction Minimized The Frame Gap Opening Caused By Elongation And Deformation Of The Frame When The Press Is Loaded.
    • In Addition, The Thick Bolster Reduces Its Deflection.
    • These Features Satisfy Requirements For Higher Accuracy Press Works.
    • Eccentric Shaft: 
    • Snk Series Are Equipped With Eccentric Shaft As Main Drive Shaft.
    • Eccentric Shafts Assure Minimal Shaft Deflection Compared To Traditional Crankshaft Designs.

    Wet Clutch: 
    • Pneumatic High Torque Wet Clutch And Brake Unit With Sintered Multi-disc Linings Provides Low Noise, Long Life Operation With Minimal Maintenance
    • Heavy Duty Slide Construction A Heavy Duty Slide Is Used For Increased Rigidity.
    • A Motorized Slide Adjustment With Digital Display Is Standard.
    • The Die Height Is Displayed In Metric Units Of 0.1 Mm For Precise Slide Adjustment.
    • The Slide Is Guided Primarily By The Plunger Guide Mechanism Along With Full- Length. Six Point Gibs.
    • The Precision Of The Plunger Guide And Gibbing Is A True Advantage With Tooling, Allowing Tight Tolerances Between The Punch And Die.

    Hydraulic Overload Safety:
    • A Built-in Hydraulic Overload Protection (Olp) System Completely Ensures Press And Tool Safety During Any Overload Situation.
    • As Soon As The Load Exceeds The Set Value, The Olp Device Will Release The Hydraulic Pressure And At The Same Time Stop.

    Standard Accessories:
    • Wet Clutch
    • Isi Marked Electric Motor With Electrical Control Panel
    • Mitsubishi (Made In Japan) Fx3u Plc
    • 7.2" Tft Touch Screen Fault Finding Hmi With Crank Angle
    • Indicator And Tool Data Storage
    • Motorized Grease Pump
    • Hydraulic Overload Safety
    • Encoder Based Programable Ecams
    • Dual Solenoid Valve
    • Die Height Indicator
    • Motorized Slide Adjustment
    • Anti Repeat Safety Device
    • Pneumatic Balancers
    • 2 Nos Mis-feed Socket

    Optional Accessories:
    • Pneumatic Die Cushion
    • Photo Electric Safety Device
    • Variable Speed With Vfd Motor
    • Quick Die Change System
    • Load Tonnage Monitor
    • Decoilers, Straightners & Feeders
     Product Details: 
    Capacity250 Ton
    Usage/ApplicationPunching
    MaterialMild Steel
      
    Load14 Ton
    Power SourceHydraulic
    Automation GradeAutomatic
    Bolster Thickness180 mm
    Length Of Stroke120 mm
    Main Motor Power25x4
    Tool Bore80 mm
      
    Fix Stroke250 mm
    SPM30
    Rating Point6 mm
    Die Height500 mm
    Slide Adjustment140 mm
    Slide Area960x720 mm
    Bolster Area1500x900 mm
    Floor To Top Of Bolster1000 mm
    Clear Dist.Betn.Uprgights940 mm
    Slide Adj. Motor1.5 kW
    Pressure Pad Area740x540 mm


    Minimum Order Quantity: 1
    1 Pack contains : 1 Unit
  • FAQs
    Need some help? Ask us!