Description

• The minimal cartridge type dust collector with dust container bucket is capable of filtering dust-loaded air through suitable filter media capable to have a dust emission level of 50mg/Nm3
• The dirty or tainted air enters the dust collector through the module inlet and goes through various channel cartridges, which retain the dust particles on the outside surface while permitting clean air to pass through the module outlet.
• As the collector works, the collected dust starts to form a dust cake, which eventually diminishes the porosity of the filter cartridges. As the pressure drop builds the ventilation volume of the collection decreases.
• To keep up a moderate pressure drop, the cleaning cycle is utilized to give continuous cleaning of the filter cartridges. The cleaning system consists of a strong state programmable timer, which actuates electric solenoids governing the air valves. These air valves deliver flashing burst or beat of high compacted air through the complex funnel into the filter tube. This push of air makes the reverse flow of air, which grows the filter cartridges to remove the collected dust.
• The cleaning methodology happens on a row-by-row basis, therefore only a fraction of total filtered air is interrupted for cleaning permitting consistent ventilation.
• The dust cake pulsed beat from the filter cartridges falls straightforwardly into the bucket at the base where it is removed.
• An exhaust fan suitable for air volume 1000 cubic feet for each moment and is mounted on the highest point of the dust collector, which creates the negative draft throughout the procedure.