Categories

Filtration Engineering and Consultants

Salt spray chamber

₹ 250000.00  Incl. GST ₹ 211864.41 Excl. GST

Description

BCS-AP Series is Programmable Salt Corrosion Spray Test Chamber with Touch Screen Controller. These Salt Spraytester is designed for surface treatment of corrosion-resistant capacity test for various materials, including paint, electroplating, organic and inorganic film, anti-rust oil, chemical treatment, and then achieves a long period of resistance to corrosion products.
  (Cyclic corrosion testing simulates the closet actual natural environment, such as salt spray. The Salt Spray testing is strict than natural environment and can be programmed or tested individually.There is national testing standard for salt spray test, with acetic acid salt spray corrosion test, Copper-accelerated acetic acid-salt spray test, and Cyclic corrosion test. BSC-AP Series apply glass fiber reinforced plastics and touch screen auto running, it can run all the environmental test in one chamber, conform relevant international standards.It is widely used to test corrosion resistance of automotive, paint, surface coating, chemical, aerospace, electronics, car industry, offshore and defense industries.

Materials used:•Test chamber: use the PVC gray impact resistance plate (from Germany), 5mm in thickness;•Thermostat water tank: use the gray impact resistance plate of PVC (from Germany), 5mm in thickness and it•is equipped with the auto water level controller to avoid the inconvenience to refill the water by manpower.•The upper cover of the test chamber: use the European transparent acrylic plate, 5mm in thickness;•The barrel for refilling the reagent: equipped with a built-in water level gauge. Use the gray impact resistance•plate made of PVC 5mm in thickness, which looks as an integral whole with the machine stand.•The basket supporter inside the test chamber: use the gray PVC impact resistance plate, the test angle can be•freely adjusted to 15º and 30º1)48 test pieces can be placed by the angle of 15 degree2)30 test pieces can be placed by the angle of 30 degree•Note: the size of the test pieces is 150×70mm H×D•The saturated air tank: made of stainless steel, 2mm in thickness and equipped with the auto water level•controller to avoid the inconvenience to refill the water by manpower.


Minimum Order Quantity: 1
1 Pack contains : 1 Unit
SELLER: Filtration Engineering and Consultants

Salt spray chamber

Product code (MPN): ITB-372E91D5
Availability:In Stock
₹ 250000.00  Incl. GST ₹ 211864.41 Excl. GST
  • Description
    BCS-AP Series is Programmable Salt Corrosion Spray Test Chamber with Touch Screen Controller. These Salt Spraytester is designed for surface treatment of corrosion-resistant capacity test for various materials, including paint, electroplating, organic and inorganic film, anti-rust oil, chemical treatment, and then achieves a long period of resistance to corrosion products.
      (Cyclic corrosion testing simulates the closet actual natural environment, such as salt spray. The Salt Spray testing is strict than natural environment and can be programmed or tested individually.There is national testing standard for salt spray test, with acetic acid salt spray corrosion test, Copper-accelerated acetic acid-salt spray test, and Cyclic corrosion test. BSC-AP Series apply glass fiber reinforced plastics and touch screen auto running, it can run all the environmental test in one chamber, conform relevant international standards.It is widely used to test corrosion resistance of automotive, paint, surface coating, chemical, aerospace, electronics, car industry, offshore and defense industries.

    Materials used:•Test chamber: use the PVC gray impact resistance plate (from Germany), 5mm in thickness;•Thermostat water tank: use the gray impact resistance plate of PVC (from Germany), 5mm in thickness and it•is equipped with the auto water level controller to avoid the inconvenience to refill the water by manpower.•The upper cover of the test chamber: use the European transparent acrylic plate, 5mm in thickness;•The barrel for refilling the reagent: equipped with a built-in water level gauge. Use the gray impact resistance•plate made of PVC 5mm in thickness, which looks as an integral whole with the machine stand.•The basket supporter inside the test chamber: use the gray PVC impact resistance plate, the test angle can be•freely adjusted to 15º and 30º1)48 test pieces can be placed by the angle of 15 degree2)30 test pieces can be placed by the angle of 30 degree•Note: the size of the test pieces is 150×70mm H×D•The saturated air tank: made of stainless steel, 2mm in thickness and equipped with the auto water level•controller to avoid the inconvenience to refill the water by manpower.


    Minimum Order Quantity: 1
    1 Pack contains : 1 Unit
  • FAQs
    Need some help? Ask us!