We are the leading manufacturer of Signal Isolator in Delhi
Design | Based on F/V and V/F linear circuit. |
Input types | RTD (Pt-100) / 2 or 3 wire or Thermocouple (J/K/ Types – type to be specified) or mV, mA input or Load cell, pressure sensor, pH/ORP sensor etc. generating DC current or voltage. AC input - Current (through external CT) (0-1)A or (0-5)A or Voltage (0-110)VAC or (0-230)VAC or 415VAC Frequency input DC levels of clock pulses of max. 10KHZ. @ (12-24)VDC |
Range | User may specify the required temperature range (for RTD or T/C input). For other inputs the required calibration range can be specified. |
Output | (4-20) mA, (0-20) mA, (0-1) VDC, (0-5) VDC, (0-10) VDC, Frequency (0-1)KHz, (0-5)KHz, (0-10)KHz etc. proportional to the specified input range. For current output, RL (max.) = 500 Ohms. For voltage output, RL (min) = 10K Ohms. |
No. of Outputs | Maximum 4 parallel independent outputs can be provided for single input. |
Accuracy | For Thermocouple and RTD Input, the calibration of output is done for the best straight line fit to give accuracy of /- 0.5% of the range. For other input the linearity depends on the input signal, where output accuracy is absolute to the input. |
Calibration | On site calibration facility through ZERO and SPAN presets accessible to the user. |
Isolation | Input and Output are optically isolated for DC and frequency inputs and galvanically isolated for the AC inputs. |
Isolation Voltage | Greater than 2.5KV. |
Mounting | DIN rail mounting ABS enclosure. |
Supply | 90 -260 VAC, 50/60Hz or 24VDC @ 200mA |
Size | 65(W) x 80(H) x 125(D) mm. |
Minimum Order Quantity: 1
1 Pack contains : 1 Unit