Categories

Shakti Pumps Ltd

Stainless Steel Submersible Pump

₹ 25000.00  Incl. GST ₹ 21186.44 Excl. GST

Description

Stainless Steel Submersible Pump
Stainless Steel Submersible Pump

Application :
The QF pumps are suitable for the following application :

  • Raw water supply.
  • Irrigation systems.
  • Groundwater lowering.
  • Pressure boosting.
  • Industrial applications.

TYPE KEY :
Example:

Type range ———————————————————————- QF
Nominal flow rate x 10 Ipm ———————————————– 210
Number of impellers ——————————————————– -5
First impeller with reduced diameter (A,B or C) ——————- -A
Second impeller with reduced diameter (A,B or C) ————– B
SS-304, SS-316 —————————————————————– N

PUMPED LIQUIDS:
Clean, thin, non-aggressive liquids without solid particles or fibers

OPERATING CONDITIONS:

  • Flow rate, Q: 1.2 m3/h – 280 m3/h
  • Head, H: Max 670m

Maximum Liquid Temperature

MotorInstallation
Flow Velocity Past MotorVerticalHorizontal
4", 6" & 8"0.15 m/s40°c40°c

The speed of the motors is approximately :

  • 4″ motors : n=2870 min-1
  • 6motors : n=2870 min-1
  • 8″ to 12″ motors : n=2870 min-1
  • The measurements were made with airless water at a temperature 2 of 20°c.The curves apply to a kinematic viscosity of 1mm /s. When pumping liquids with a density higher than that of water, motors with correspondingly higher outputs must be used.
  • The bold curves indicate the recommended performance range.
  • The performance curves are inclusive of possible losses such as non-return valve loss.

QF2, QF5, QF6, QF12, QF20, QF25 CURVE :

  • Q/H: The curves are inclusive of valve and inlet losses at the actual speed
  • Power Curve: Bpkw/Stage shows pump power input per stage
  • Efficiency Curve: Efficiency shows pump stage efficiency

QF10, QF15, QF30, QF50, QF75, QF100, QF125, 0F160, QF210, QF270, QF360 CURVE

  • Q/H: The curves are inclusive of valve and inlet losses at the actual speed
    Operation without non-return valve will increase the actual head at nominal performance by 0.5 to 1.0 m
  • NPSHR The curve is inclusive of suction case and shows required inlet pressure
  • Power Curve: It shows pump power input at the actual speed for each individual pump size
  • Efficiency Curve: Efficiency shows pump stage efficiency

SELLER: Shakti Pumps Ltd

Stainless Steel Submersible Pump

Product code (MPN): ITB-B1D4BA11
Availability:In Stock
₹ 25000.00  Incl. GST ₹ 21186.44 Excl. GST
  • Description
    Stainless Steel Submersible Pump
    Stainless Steel Submersible Pump

    Application :
    The QF pumps are suitable for the following application :

    • Raw water supply.
    • Irrigation systems.
    • Groundwater lowering.
    • Pressure boosting.
    • Industrial applications.

    TYPE KEY :
    Example:

    Type range ———————————————————————- QF
    Nominal flow rate x 10 Ipm ———————————————– 210
    Number of impellers ——————————————————– -5
    First impeller with reduced diameter (A,B or C) ——————- -A
    Second impeller with reduced diameter (A,B or C) ————– B
    SS-304, SS-316 —————————————————————– N

    PUMPED LIQUIDS:
    Clean, thin, non-aggressive liquids without solid particles or fibers

    OPERATING CONDITIONS:

    • Flow rate, Q: 1.2 m3/h – 280 m3/h
    • Head, H: Max 670m

    Maximum Liquid Temperature

    MotorInstallation
    Flow Velocity Past MotorVerticalHorizontal
    4", 6" & 8"0.15 m/s40°c40°c

    The speed of the motors is approximately :

    • 4″ motors : n=2870 min-1
    • 6motors : n=2870 min-1
    • 8″ to 12″ motors : n=2870 min-1
    • The measurements were made with airless water at a temperature 2 of 20°c.The curves apply to a kinematic viscosity of 1mm /s. When pumping liquids with a density higher than that of water, motors with correspondingly higher outputs must be used.
    • The bold curves indicate the recommended performance range.
    • The performance curves are inclusive of possible losses such as non-return valve loss.

    QF2, QF5, QF6, QF12, QF20, QF25 CURVE :

    • Q/H: The curves are inclusive of valve and inlet losses at the actual speed
    • Power Curve: Bpkw/Stage shows pump power input per stage
    • Efficiency Curve: Efficiency shows pump stage efficiency

    QF10, QF15, QF30, QF50, QF75, QF100, QF125, 0F160, QF210, QF270, QF360 CURVE

    • Q/H: The curves are inclusive of valve and inlet losses at the actual speed
      Operation without non-return valve will increase the actual head at nominal performance by 0.5 to 1.0 m
    • NPSHR The curve is inclusive of suction case and shows required inlet pressure
    • Power Curve: It shows pump power input at the actual speed for each individual pump size
    • Efficiency Curve: Efficiency shows pump stage efficiency

  • FAQs
    Need some help? Ask us!