Categories

Patel Scientific Instruments Pvt ltd

STABILITY CHAMBER

₹ 98000.00  Incl. GST ₹ 83050.85 Excl. GST

Description

PSI Test Chambers are developed as a result of intensive R & D, and confirming international standards, our offering services are Calibration, validation and comply IQ, OQ, and PQ protocols.
Temperature Range10°C to 60°C Accuracy / Uniformity : ±0.2°C / ±1.0°C
Humidity Range40% to 95% Rh. Accuracy / Uniformity ±2%RH / ±3%RH
Temperature / Humidity DisplayDigital LED 3 ½ Digit, Resolution :0.1°C / 1% RH
ControlMicroprocessor based PID Control with auto tune
 CE Marked
Temperature SensorPT -100
RH SensorDirect Electronics Capacitance type
HeatingU’ Shaped Nichrome wire Air heater in SS Sheathing
CoolingCFC Free Emerson make compressor utilizing R 134A 
 ecofriendly refrigerant
Steam InjectionBoiler with reservoir made of thick stainless steel, with heater, water inlet control, low water level safeguard and insulation
Air circulationBharat Vidhut make Flange motor with impeller / Blower
ConstructionDouble Walled, gap between walls filled with PUF Insulation
Shelves Heavy S.S 304 Rod Adjustable Trays
GMPInner Chamber Stainless steel mirror polished 0.8 mm 
 Outer chamber and exterior of Mett finish 1.0 mm stainless steel.
Double DoorInner full viewing door and outer door insulated with lock and key arrangement Control panel with electrical switch gear and refrigeration system (CFC Free) mounted on top for easy service accessibility. Unit mounted on castor wheels
Safety Features Float switch to cutoff the mains supply in case of
 low water level in the reservoir tank.
 Safety Thermostat in evaporation tray to cut off heater supply in case of low water level.
  Inbuilt safety control system to cut off the supply in case of overshoot and undershoot of Temperature giving audio visual alarm.
 Additional safety thermostat to cut off the supply in case of overshoot of temperature.
  2 min. compressors ‘ON’ delay timer to safe guard the compressor
 

Image

SELLER: Patel Scientific Instruments Pvt ltd

STABILITY CHAMBER

Product code (MPN): ITB-4855617E
Availability:In Stock
₹ 98000.00  Incl. GST ₹ 83050.85 Excl. GST
  • Description
    PSI Test Chambers are developed as a result of intensive R & D, and confirming international standards, our offering services are Calibration, validation and comply IQ, OQ, and PQ protocols.
    Temperature Range10°C to 60°C Accuracy / Uniformity : ±0.2°C / ±1.0°C
    Humidity Range40% to 95% Rh. Accuracy / Uniformity ±2%RH / ±3%RH
    Temperature / Humidity DisplayDigital LED 3 ½ Digit, Resolution :0.1°C / 1% RH
    ControlMicroprocessor based PID Control with auto tune
     CE Marked
    Temperature SensorPT -100
    RH SensorDirect Electronics Capacitance type
    HeatingU’ Shaped Nichrome wire Air heater in SS Sheathing
    CoolingCFC Free Emerson make compressor utilizing R 134A 
     ecofriendly refrigerant
    Steam InjectionBoiler with reservoir made of thick stainless steel, with heater, water inlet control, low water level safeguard and insulation
    Air circulationBharat Vidhut make Flange motor with impeller / Blower
    ConstructionDouble Walled, gap between walls filled with PUF Insulation
    Shelves Heavy S.S 304 Rod Adjustable Trays
    GMPInner Chamber Stainless steel mirror polished 0.8 mm 
     Outer chamber and exterior of Mett finish 1.0 mm stainless steel.
    Double DoorInner full viewing door and outer door insulated with lock and key arrangement Control panel with electrical switch gear and refrigeration system (CFC Free) mounted on top for easy service accessibility. Unit mounted on castor wheels
    Safety Features Float switch to cutoff the mains supply in case of
     low water level in the reservoir tank.
     Safety Thermostat in evaporation tray to cut off heater supply in case of low water level.
      Inbuilt safety control system to cut off the supply in case of overshoot and undershoot of Temperature giving audio visual alarm.
     Additional safety thermostat to cut off the supply in case of overshoot of temperature.
      2 min. compressors ‘ON’ delay timer to safe guard the compressor
     

    Image

  • FAQs
    Need some help? Ask us!