Categories

Simandhar Technology Co

Weighbridge

₹ 375000.00  Incl. GST ₹ 317796.61 Excl. GST

Description

Weigh Bridge
Steel Pit type Weighbridges:
Suitable for use in areas of limited space, the PIT weighbridge is constructed with two main longitudinal steel I-Beams that are braced very rigidly with more smaller I-Beams transversely bearing I beam sections in adequate nos. and finally topped up with MS plates to complete the structure suitable for permanent type installations .Ground level deck provides safe access for trucks and personnel.

Design Structure:

Complete all Steel structure, fabricated to form a box type squarish grid network in semi bolted construction covered with M.S. Plates duly ribbed, a rugged cubical web unique modular design. The modules consists of Steel deep section main "I" Beams, which are placed longitudinally in the direction of the traffic, which take the real weight. The load cells are mounted under these main beams. Cross 'I' beam modules are bolted / welded crosswise, carefully fabricated in rigid box type grid work to prevent deflection and distortion, even on overloads. Retrofit cubical web design is symmetrical axle load bearing, where the deck plate acts as a surface skin rather than part of the load bearing structure underneath. The sophisticated design is unmatched performance that others can only hope to emulate.

Minimum Order Quantity: 1
1 Pack contains : 1 Unit

Specifications – PIT Type WeighBridge

Standard Sizes

Platform Size

Available Capacities

LOADCELL

PRICE IN LAKH APPROX*

7.5m x 3m

30 MT – 50 MT

4

3.75*  TO 4.20*

9 M x 3m

30 MT – 60 MT

4

5.40* TO 6.10*

12M x 3m

50 MT – 60 MT

6

6.50* TO 7.20*

14M X 3M

50 MT – 80MT

6

7.30* TO 7.70*

16m x 3m

50 MT – 100MT

8

8.50* TO 9.40*

18M x 3m

50 MT – 100 MT

8

9.20* TO 9.90*

20M X 3M

ALSO AVAILABLE

SPECIFICATION SUBJECT TO CHANGE WITHOUT NOTICE.

Load cell type

“KELI” / “ZEMIC” BRAND Cup & Ball Type Shear Beam Loadcell

 

Protection class    

IP – 67

Load cell output

2 mv/v

Load cell cable

10 / 15 / 18 meters standard.

Nos. of Load Cells

4 / 6 / 8 / 10 nos.

Girders / “I” Beam

Main Beam – 5 / 6 Nos. of Weigh bridge Length

Cross Beam – 2 Nos. of Weigh bridge Width

Top Plate

8 / 10 / 12 mm MS Plain Top Plate with 12 mm Ribbed design

Foundation

Based on RCC raft and side. Brick walls saving 40% construction costs and time

Foundation parts

Modular cubical web bolting design,  Special non-shrinking grouting materials used which are re- usable in relocations

Readability

5 / 10 / 20 Kg.

IT – Unit

Alpha Numeric Digitizer, with 1530 records memory, RS-232 Computer Interface

Mounting system

Self existing mounting using Self aligned loading

Safe loads
Strength & safety

100% on dead load
Overload protection  : 150% static load

load structural overload: 300% static load

Side Rail Kerbing

Optional in either side for vehicle guidance & safety

Installation

Fastest installation and easy relocation due to retrofit semi-bolted construction

CHARGES

INSTALLATION, LEGAL METROLOGY DIVISION STAMPING  AND TRANSPORTATION CHARGES WITH TAX ARE EXTRA.

IMAGES , SIZE AND SPECIFICATIONS ARE DIFF. AS PER PRODUCT MODELS.

Price will be change without notice.

SELLER: Simandhar Technology Co

Weighbridge

Product code (MPN): ITB-5C47126E
Availability:In Stock
₹ 375000.00  Incl. GST ₹ 317796.61 Excl. GST
  • Description
    Weigh Bridge
    Steel Pit type Weighbridges:
    Suitable for use in areas of limited space, the PIT weighbridge is constructed with two main longitudinal steel I-Beams that are braced very rigidly with more smaller I-Beams transversely bearing I beam sections in adequate nos. and finally topped up with MS plates to complete the structure suitable for permanent type installations .Ground level deck provides safe access for trucks and personnel.

    Design Structure:

    Complete all Steel structure, fabricated to form a box type squarish grid network in semi bolted construction covered with M.S. Plates duly ribbed, a rugged cubical web unique modular design. The modules consists of Steel deep section main "I" Beams, which are placed longitudinally in the direction of the traffic, which take the real weight. The load cells are mounted under these main beams. Cross 'I' beam modules are bolted / welded crosswise, carefully fabricated in rigid box type grid work to prevent deflection and distortion, even on overloads. Retrofit cubical web design is symmetrical axle load bearing, where the deck plate acts as a surface skin rather than part of the load bearing structure underneath. The sophisticated design is unmatched performance that others can only hope to emulate.

    Minimum Order Quantity: 1
    1 Pack contains : 1 Unit

    Specifications – PIT Type WeighBridge

    Standard Sizes

    Platform Size

    Available Capacities

    LOADCELL

    PRICE IN LAKH APPROX*

    7.5m x 3m

    30 MT – 50 MT

    4

    3.75*  TO 4.20*

    9 M x 3m

    30 MT – 60 MT

    4

    5.40* TO 6.10*

    12M x 3m

    50 MT – 60 MT

    6

    6.50* TO 7.20*

    14M X 3M

    50 MT – 80MT

    6

    7.30* TO 7.70*

    16m x 3m

    50 MT – 100MT

    8

    8.50* TO 9.40*

    18M x 3m

    50 MT – 100 MT

    8

    9.20* TO 9.90*

    20M X 3M

    ALSO AVAILABLE

    SPECIFICATION SUBJECT TO CHANGE WITHOUT NOTICE.

    Load cell type

    “KELI” / “ZEMIC” BRAND Cup & Ball Type Shear Beam Loadcell

     

    Protection class    

    IP – 67

    Load cell output

    2 mv/v

    Load cell cable

    10 / 15 / 18 meters standard.

    Nos. of Load Cells

    4 / 6 / 8 / 10 nos.

    Girders / “I” Beam

    Main Beam – 5 / 6 Nos. of Weigh bridge Length

    Cross Beam – 2 Nos. of Weigh bridge Width

    Top Plate

    8 / 10 / 12 mm MS Plain Top Plate with 12 mm Ribbed design

    Foundation

    Based on RCC raft and side. Brick walls saving 40% construction costs and time

    Foundation parts

    Modular cubical web bolting design,  Special non-shrinking grouting materials used which are re- usable in relocations

    Readability

    5 / 10 / 20 Kg.

    IT – Unit

    Alpha Numeric Digitizer, with 1530 records memory, RS-232 Computer Interface

    Mounting system

    Self existing mounting using Self aligned loading

    Safe loads
    Strength & safety

    100% on dead load
    Overload protection  : 150% static load

    load structural overload: 300% static load

    Side Rail Kerbing

    Optional in either side for vehicle guidance & safety

    Installation

    Fastest installation and easy relocation due to retrofit semi-bolted construction

    CHARGES

    INSTALLATION, LEGAL METROLOGY DIVISION STAMPING  AND TRANSPORTATION CHARGES WITH TAX ARE EXTRA.

    IMAGES , SIZE AND SPECIFICATIONS ARE DIFF. AS PER PRODUCT MODELS.

    Price will be change without notice.

  • FAQs
    Need some help? Ask us!