87860 load cells are suitable for truck, tank and hopper weighing.
This is constructed from electroless nickel plated heat treated tool steel suitable for harsh industrial applications.
Cup and steel ball mounted mechanism is self restoring and self centering.
Transient voltage protection is provided for protection against lightning and line voltage faults.
- 87860 load cells are suitable for truck, tank and hopper weighing.
- This is constructed from electroless nickel plated heat treated tool steel suitable for harsh industrial applications.
- Cup and steel ball mounted mechanism is self restoring and self centering.
- Transient voltage protection is provided for protection against lightning and line voltage faults.
|
| Type | Double Ended Shear Beam |
| Capacity | 30 Ton |
| Material | Nickel Alloy Steel |
| Ingress Protection | IP68 |
| Application | Hopper Scales |
| Features | Hardened tool steel construction |
| Output Sensitivity(FS) | 2.0 +/- 0.002 mV/V |
| Creep Error (30 minutes) | +/- 0.03% FS |
| Temperature Effect on Zero | +/-0.02% FS/DegC |
| Temperature Effect on Output | +/-0.015% FS/DegC |
| Zero balance | +/- 1% FS |
| Maximum Safe Overload | 150% FS |
| Ultimate Safe Overload | 300% FS |
| Recommended Excitation Voltage | 5 to 15V DC |
| Maximum Excitation Voltage | 15V DC |
| Input Resistance | 770 +/- 20 Ohms |
| Output Resistance | 770 +/- 7 Ohms |
| Insulation resistance at 50V DC | >= 1000 M Ohm |
| Compensated Temperature Range | -10 to +40 Deg C |
| Operating Temperatue Range | -20 to +70 Deg C |
| Cable Length | 15 m |
| Tightening Torque | 10 m.Kg |
| Deflection | < 0.5 mm at FSO |
| Hysteresis | < 0.02 % FSO |
| Non-Repeatability | < 0.01 % FSO |
Minimum Order Quantity: 1
1 Pack contains : 1 Unit
